top of page

Forum Posts

Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Cut off one end of the T568B standard network cable and reconnect the RJ45 plug according to the following sequence in the diagram. The newly connected RJ45 plug is connected to the inverter. The original end is connected to the battery pack BMS. Connect Connect the master battery C-up port to the Inverter Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Press and hold the “Enter” key for 3 seconds to access the main menu. Using the up and down arrows, navigate to setting program 5(Some models are program 4, refer to the Inverter manual). Press the “Enter” key to change the setting. Using the up and down arrows, select the battery type as” PYL”. Press the” Enter” key to save the setting.
RUiXU 48V 5120Wh Server Rack Battery /  Voltronic or MPP Inverter Communication content media
0
0
43
Rachel Wang
Jul 31, 2023
In Server Rack Battery Discussion
This article juxtaposes the lug connector with pluggable battery pole connector. As we shall see, though lug connector is priced lower than the pluggable battery pole connector, the latter connector trumps in many aspects, some of which are quite crucial in function and may shape the product lifespan. Divided into two main parts, the juxtaposition of the two devices sheds light on product structure, component material and respective working standard. Just by taking a glimpse of their silhouettes, we can find the more modest-looking lug connector leaves nuts and copper plates exposed on both ends. And they require manual screwing when connecting to the BESS and outer electricity-consuming devices, while the silver-plated pluggable connector nearly covers itself with only BESS connecting part exposed on one end and it doesn’t require manual screwing entirely. Actually, an entire pluggable battery pole connector is composed of two blocks and the orange-hued blocks have different interfaces with the black blocks. So it leaves no room for cross-mating. Besides the color, there is positive locking mechanism design on the pluggable connector preventing accidental disconnections. And still concerning its joint part, the mated connector system can be rotated 360°to simplify installation. One less observable fact about it is that with the housings, the pluggable battery pole connectors won’t be affected by dust, low-pressure water jets, condensation or water spray. But lug connectors are vulnerable to these potential hazards. Pertaining to the working standard, pluggable battery pole connector meets a wider range of working temperature. So it has wider environment application than lug connector. Another applauded side about the pluggable connector is its IEC rated identification for 120A and 1500V under DC. The comparisons between these two connectors are summarized as below:
0
0
69
Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Connect Connect the master battery C-up port to the BMS communication port on the inverter. . Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Start from the main menu, click the marked buttons, and enter"batt setup" Enable “BMS Lithium Batt” and set its value to “00”. You can visit the sol-ark official website for more information about installing different inverters. Look for the different inverter manuals at this link https://www.sol-ark.com/wp-content/uploads/ This link is provided by sol-ark for some guidance on setting up communication with lithium batteries https://www.sol-ark.com/wp-content/uploads/2021/09/Battery-Communications-Integration-Guide-V1.8.pdf
RUiXU 48V 5120Wh Server Rack Battery /Sol-ark Inverter Communication content media
0
0
43
Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Connect Connect the master battery C-up port to the BMS communication port on the inverter. . Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Start from the main menu, click the marked buttons, and enter"battery setup" Select "Batt Mode" to “Lithium ” and set the "Lithium" value to “00”.
RUiXU 48V 5120Wh Server Rack Battery / Deye Inverter Communication content media
0
0
10
Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Cut off one end of the T568B standard network cable and reconnect the RJ45 plug according to the following sequence in the diagram. The newly connected RJ45 plug is connected to CCGX. The original end is connected to the battery pack BMS. Connect Connect the master battery C-up port to the VE.Can of Victron Colour-Control-GX. Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Menu>settings>services>CAN-bus Profile, select CAN-bus BMS(500 kbit/s), and Confirm and restart(Menu>settings>general>reboot?).
RUiXU 48V 5120Wh Server Rack Battery / Victron Inverter Communication content media
0
0
62
Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Connect Connect the master battery C-up port to the BMS communication port on the inverter. Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Pressing and holding the "ENTER" button for 3 seconds, the unit will enter setting mode. Press the “UP” or “DOWN” button to select setting programs to program 05. Press the “ENTER” button to enter the battery type setting, Press the “UP” or “DOWN” button to select the battery type as “Li” and then press “ENTER” to confirm. It will switch to Program 36, and choose the communication protocol as “L52”(If the Settings are incorrect, the battery pack will not be able to connect to the inverter). Press “ENTER” to confirm and then press the “ESC” button to exit.
RUiXU 48V 5120Wh Server Rack Battery / Growatt Inverter Communication content media
0
0
21
Rachel Wang
Jul 31, 2023
In Inverters Communication
Connect Communication Cable Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) Cut off one end of the T568B standard network cable and reconnect the RJ45 plug according to the following sequence in the diagram. The newly connected RJ45 plug is connected to CCGX. The original end is connected to the battery pack BMS. Connect Connect the master battery C-up port to the Conext Gateway. Battery setting (Inverter Protocol chosen by ADD) Master battery Slave battery Inverter setting Please refer to the following document
RUiXU 48V 5120Wh Server Rack Battery / Schneider Inverter Communication content media
0
0
8

Rachel Wang

Admin
More actions
bottom of page